	Hyderabadghar.com\|Contact Us\| Site Map
HOME MATERIAL SUPPLIERS SERVICE PROVIDERS GHAR TIPS GHAR GALLERY LEGAL ASPECTS GharBlog

Using Ladder Jacks

PROJECT BASICS

Project: Easy
Estimated Project Time: A few minutes to set up
Start Tips: Determine best position for the two ladders
Safety Tips: When working on scaffolding be aware of your every move; an innocent step can result in your falling off
Recommendation: Do-it-Yourself

Two heavy-duty extension ladders

Set of ladder jacks

Scaffold plank

Fig. 1

INSTRUCTIONS

1) Set up the ladder jacks
Set two ladders in position for the jacks so that when the plank is in position each of its ends will extend 1 foot beyond a jack. If using a 10-foot long plank this means setting the ladders about 8 feet apart. Check that each ladder is level and stable. Working one ladder at a time, carry up a ladder jack and, at the desired height, secure the jack properly to the rung. (Fig. 1) Make sure that both jacks are set to an equal height. Refer to the instructions that accompany the jacks for specific information.

Fig. 2

2) Bring up first end of plank
Carry one end of the plank up one of the ladders while a helper remains on the ground supporting the other end of the plank. (Fig. 2)

Fig. 3

3) Bring up second end of plank
Rest the first end of the plank on the ladder jack and hold it in place while the helper brings up the second end. The first end juts over the jack as the second end comes up. (Fig. 3)

Fig. 4

4) Secure the plank
Flip the plank into position onto the jacks. Make sure it is securely held by the jacks and extends at least 12 inches over at each end. (Fig. 4)

Home |Construction Needs | Home Needs| Ghar Galleries | Ghar Blog